Wall mount for Bosch Powerpack 725 battery for electric bicycle / cargo bike
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a sturdy wall mount designed for a Bosch Powerpack 725 battery commonly used in electric bicycles or cargo bikes
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 87
- Wydruki
- 2
- Wyświetlenia
- 803
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
sSince I couldn't find a wall mount for the Bosch Powerpack 725, I created one myself.
Inspired by SeniorRossi (https://www.printables.com/de/@SeniorRossi_566649 )wall mount design, but unfortunately, it only fits Bosch Powerpack 500 batteries.
https://www.printables.com/de/model/414838-bosh-powerpack-500-wall-mount
Considering the battery's weight of 4 kilograms, I focused primarily on stability during the design and printing process.
For the printing parameters, I selected
4 wall loops
and used a
honeycomb infill with 45% density.
You could probably go a bit lower and save time and material.
In this final print I used Tree Support but my test prints before where done without any support and came out fine.
For printing I used Bambulab PLA Though in black.
On my Bambulab printer, it took 5 hours and 40 minutes to complete the print.
Any comments or suggestions regarding this design are appreciated.