Polymaker & PolyTerra Cardboard Spool Adapter | AMS Compatible | ICE Version | Handy Series
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Get your Polymaker & PolyTerra filament spools to roll perfectly consistently with this ICY Cardboard spool adapter!
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 93
- Wydruki
- 2
- Wyświetlenia
- 891
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
About
This spool adapter is specifically made for Polymaker & PolyTerra filament. The spool adapter will be usable for systems like the Bambu Lab AMS system. Not only are these filament adapters durable they will also reduce friction on spool holders on the inside and on the outside. Furthermore, the adapters are reusable and easily added onto the Polymaker & PolyTerra filament spools.
The adapter will fit on both the PolyTerra and PolyMaker filament spools.
Printing time on Bambu Lab X1C = 50 min
recommended
- print the first layer on 50% speed
- Tested with ABS & PLA
Extra Info
Note: This is the first version of this Adapter, although I have thoroughly tested and engineered the adapters to work as they should, there might be some perfect imperfections ;)
Do send me a message if u find any inconsistencies, run into some trouble, or if you have any suggestions for spools that need a cool spool adapter!
{Image improvements will be rendered soon!}
Thank you very much for using my design and enjoy printing! :)