Web Camera Holder for Next Gen Safety Enclosure for Prusa
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a camera holder to adapt the port at the rear into a camera holder. It uses hardware provided from Printed Solid
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
A web camera holder that is designed to create a simple slot at the rear of the Next Gen Safety Enclosure for Prusa Mini but should also work in other models that sport the same port pattern from Printed Solid. It works with the basic hardware provided so no need for additional hardware.
Just print and screw in place. (make sure the bolts go out of the enclosure if using the M3 - 20 bolts. It can lead to issues where the bolt is in the way if you point them inward).
I am only posting the V2 of the model as the V1 has serious issues.
My print has the following basic specs:
Material: PLA+
Infill: 15%
Layer Height: 0.10mm
No Support or Brim
Used some Elmer's but not really needed.
Really you can change any of the above specs and get this thing out.
Just published a Tripod version to allow it to attach to a mini Tripod.