Prusa LCD and 3.5 Touchscreen Housing for Enclosures
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pusa LCD and 3.5 Touchscreen Housing for Enclosures Because all the LCD housings, I found are open at back, I designed…
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 122
- Wydruki
- 1
- Wyświetlenia
- 1738
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Pusa LCD and 3.5 Touchscreen Housing for Enclosures
Because all the LCD housings, I found are open at back, I designed a closeable one with clickable backplate. Screw backplate to enclosure then click it on.
The Touchscreen mount is for Nextion 3.5 screens (NX4832T035).
Use some m3 hardware.
I added my f3d file for fusion 360 too.
If you like it, like it.
And please, if you have time to search, download and print, then you have also 5-10 minutes to post a make.
Happy printing from Germany.
Print instructions
for bottom part deactivate skirt.