1 / 2
TPU shelf corner bumper — zdjęcie 1
1 / 2

TPU shelf corner bumper

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

TPU corner for 18mm thick shelves

Ocena
5 / 5
Polubienia
121
Pobrania
413
Wydruki
6
Wyświetlenia
1469
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Living Room
Licencja
Creative Commons — Attribution

When I hit myself in head I decided to print soft bumper for sharp edges of my shelf. I wasn't happy with the designs that were available on Printables so i decided to design my own project from scratch.

The main difference is that walls are curved to compensate softness of the material - so the bumper fits into the shelf corner even without gluing (but it's best to add some glue or double sided tape for security).

This project file should be printed with soft corner pointing upwards. If you have any adhesion problems - add brim. Use whatever works with your TPU and 3D printer.

This piece was designed for 90 degrees corner of 18mm thick shelf.

Tagi