OpenMower Cover UI plate for YardForce SA600H and similar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover UI plate (blind, Visaton K50 speaker, GPS-SMA) for YardForce SA600H (and similar models)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A Cover UI Plate, Speaker holder, GPS-SMA Plug, for my https://openmower.de/ build.
Fit for YardForce SA600H (and similar models).
Update 08/17/2023:
If your main interest is the mount of your speaker, better check this alternative sound box creation, as it's much better protected against top-water.
Update 08/03/2023:
Attention: It turns out, that even with the additional YardForce Top-Cover, this design has not enough top-water protection! You need to add some kind of plastic-cap to protect your OpenMower electronics.
My major Print values:
- PLA, 0.4mm Nozzle, 0.2mm layer height
- Print up-side-down
- Print-bed- support required (but with no other supports!)
- 15% Gyroid
- See pictures for more info