Liczymy pasujące modele…
This is the GPS mount I'm using to mount the UBLOX RTK GPS antenna inside my YardForce Classic 500 mower. In the picture you can see a mount for an external IMU, but this won't work since the UBLOX antenna has a magnet in its base.…
OpenMower MPU-6050 IMU Mount for Mowgli Project https://www.amazon.com/gp/product/B01DK83ZYQ/ref=ppx_yo_dt_b_asin_title_
These are printable brackets for the Openmower Mowgli version to hold the Raspberry Pi, Ardusimple RTK receiver and a XL4015 DCDC buck convertor These brackets are designed to use slotted connections that already exist in in the Yardforce…
This is a internal mount for an ArduSimple Survey GPS antenna mount for the Yardforce Classic 500 - the main mower of the OpenMower project ( https://github.com/ClemensElflein/OpenMower ). My chassi is six month older as the one from…
A Speaker holder, designed as box, with louder and more voluminous sound for my https://openmower.de/ build. Will fit in the left or right middle slot of a YardForce Classic 500. Update 08/17/2023 Redesigned a version 4 variant with these…
OpenMower YardForce SA/SC/NX Speaker Box for Visaton K40SQ for use with DFPlayer Mini. Print with PETG 0.2+ Layer Height
OpenMower YardForce NX100i Ardusimple Helical GNSS Antenna Mount print with TPU / TPC for better flex and sealing TPU: shore 60-70D, TPC 30D or 40D gasket optional when printed with TPU foam like Varioshore, beware of changing sizes mount…
Changes: screw holes are widened to fit M4 screws tiny legs are reinforced with DIN912 M2 20mm screws
These are printable brackets for the Openmower Mowgli version to hold the Raspberry Pi, Ardusimple RTK receiver For NX100i, SA650 and similar models Model still needs some tweaking, STEP included
A holding bracket for a WiFi dongle and a speaker holder. I'm using this for my OpenMower build. I'm using this with the YardForce Classic 500. The WiFi dongle is not available anymore, the speaker is a Visaton K50 8 Ohms. You will need…
This 3D-printed mount is designed specifically for the YardForce Classic 500 when used with the OpenMower project. It provides a clean and secure way to attach an external WiFi antenna, improving connectivity and reception for your…
This is a roof mount for the ardusimple GPS survey antenna. Use a two inch 5/8"-11 UNC hex head screw Use a diameter 25mm steel rod fix the rod with small steel screw There is a hole in the adaptor big enough for a SMA connector with…
A mount for MPU-6050 on YardForce SA models. Fixed directly on motherboard, so can be mounted on any model with GForce v6 motherboard. I've found my inspiration from mikec model on discord:…
This is an internal mount for the ardusimple survey GPS antenna for the open mower project. Fits in a YardForce classic 500 mower. Saw off a 5/8" UNC screw for antenna Use M4 screws for mounting. antenna_distance = 0,32 I added a thin…
This is an external mount for the ardusimple survey GPS antenna for the open mower project. Fits on the front case of a YardForce classic 500 mower. Take a one inch 5/8"-11 UNC hex head screw for antenna Use M4 screws for mounting. Drill…
This is a mount for Raspberry Pi 4 and Armour case for the open mower project. Fits in a YardForce classic 500 mower. You can also mount the Pololu AltIMU-10v5 but i do not recommend at because auf interference. Use M3 for the clip3 Use…
A Speaker box, which uses the back-hole of the stock- beeper, as sound- output for my https://openmower.de/ build. Build for YardForce SA600H, but might also fit to other SA/SC models (please report). My major Print values: PLA, 0.4mm…
The OpenMower mainboard (mine is v0.11.x from the Gadgets By Vermut kit) has a neo pixel LED to show the various states. However, when the housing is closed, you cannot see it from the outside. I had transparent polycarbonate 3d printer…
This is a mount for ardusimple uBlox RTK GPS modul for the open mower project. Fits in a YardForce classic 500 mower. You can also mount the long range xBee sender. Use M3 screws and nuts for the PCB Use M4 screws for mounting to case…
I created a mount for a Helix HA-901 antenna to install it on the front of a Yardforce. This is my first design, so don't expect too much from the FreeCAD file :-)
I use these mounts to hold the antenna for the radio link to the GPS RTK base station in place. The two parts are slightly different in terms of the mounting holes and diameters for the antenna. I printed them in PLA, but perhaps PETG,…
A Cover UI Plate, Speaker holder, GPS-SMA Plug, for my https://openmower.de/ build. Fit for YardForce SA600H (and similar models). Update 08/17/2023: If your main interest is the mount of your speaker, better check this alternative sound…
A 40x40x10 fan bracket to cool the charging circuit of the mainboard to allow for higher charging current. Best printed out of ABS or ASA. 5V fan is connected to +5V and ground on the unused USB headers.
i used 6mm M2.5 Screws
This is an mount for the Pololu AltIMU-10v5 for the open mower project. Fits in a YardForce classic 500 mower. There is one mount with IMU x pointing in forward direction and on with IMU y pointing in forward driving direction. Use M3 for…
This is a speakermount fou your OpenMower project Especially for the Yard Force Classic 500 I used two M3 heatinsert and two M3 cuntersunk screws to attach the mount to the mowerhousing. I used this speaker for this mount.
I was having overheating issues with my Yardforce 500 Classic with a Vermut mainboard on the xESC motors. Since this mainboard has a 5V connector, everything was ready for a fan connection. The mount simply slides over the components and…
These brackets are intended to prevent the ArduSimple receiver board together with the Xbee radio module from shaking loose from the OpenMower mainboard over time. I use them for two month now (during summer) and they work very well so…
A mount for RaspberryPi and simpleRTK2B on YardForce SA models. It was quite difficult to build an openmower/mowgli robot mower with SA models because of lack of place. So I took inspiration from…
I have modified my Yard Force Classic 500 into an OpenMower mower. Firstly, because I like it and secondly, to distinguish it from my unmodified mower - and because I really like the OpenMower logo - I created these two logo plates, one…
This is the GPS mount I'm using to mount the UBLOX RTK GPS or HA901 antenna inside my YardForce Classic 500/500B mower. Print in PETG
OpenMower YardForce NX100i Ardusimple Helical GNSS Antenna Mount print with TPU / TPC for better flex and sealing TPU: shore 60-70D, TPC 30D or 40D gasket optional when printed with TPU foam like Varioshore, beware of changing sizes mount…
