MT-07 Tail Tidy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was designed for my 2022 Yamaha MT-07, I designed it to be mounted using the hardware from the stock fender.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 224
- Wydruki
- 0
- Wyświetlenia
- 1733
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I recommended printing this in PETG, ABS or another material with a high melting point(I did my prototype in PLA and it didn't fall off but the angle of my plate isn't the same as when I installed it). I Printed with 100% infill, this probably isn't necessary but it doesn't have much volume so why not. I attached it to the tail using the large headed black bolts that are visible on the top of the stock fender. It is a perfect fit for my 2022 MT-07, it may work for the R7 and similar model but I'm not sure. If you try it please let me know and I will update the description.