1 / 3
MT-07 Tail Tidy — image 1
1 / 3

MT-07 Tail Tidy

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This was designed for my 2022 Yamaha MT-07, I designed it to be mounted using the hardware from the stock fender.

Rating
0 / 5
Likes
17
Downloads
224
Makes
0
Views
1,733
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

I recommended printing this in PETG, ABS or another material with a high melting point(I did my prototype in PLA and it didn't fall off but the angle of my plate isn't the same as when I installed it). I Printed with 100% infill, this probably isn't necessary but it doesn't have much volume so why not. I attached it to the tail using the large headed black bolts that are visible on the top of the stock fender. It is a perfect fit for my 2022 MT-07, it may work for the R7 and similar model but I'm not sure. If you try it please let me know and I will update the description. 

Tags