1 / 2
Tripod Extension 6 inch (150mm) long with 1/4-20 threads — zdjęcie 1
1 / 2

Tripod Extension 6 inch (150mm) long with 1/4-20 threads

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A basic 6 inch (150mm) long tripod extension with 1/4-20 thread at both ends.

Ocena
5 / 5
Polubienia
39
Pobrania
512
Wydruki
5
Wyświetlenia
1567
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution

A basic 6 inch (150mm) long tripod extension with 1/4-20 thread at both ends. Diameter is 1 inch (25mm).. simply screw onto you tripod to add 6 inches.. This is perfect for a short tripod that just needs a little more height to get your camera or phone where you need it. This has female threads on one end and male threads on the other, so no need to add metal hardware..
It's very ridged and the plastic threads fit nice and tight onto my tripod for a secure fit.

Print instructions

Category: Camera Summary

A basic 6 inch (150mm) long tripod extension with 1/4-20 thread at both ends. Diameter is 1 inch (25mm).. simply screw onto you tripod to add 6 inches.. This is perfect for a short tripod that just needs a little more height to get your camera or phone where you need it. This has female threads on one end and male threads on the other, so no need to add metal hardware..
It's very ridged and the plastic threads fit nice and tight onto my tripod for a secure fit.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

</div>Rafts:

Yes

Supports:

No

</div>Resolution:

0.16

Infill:

25% (grid)

</div>
Filament:

Eryone TPU Black

Notes:

I used 5 walls top, bottom and side to provide extra strength to the plastic threads at each end. Definitely use a raft as this is fairly tall and skinny..

Tagi