1 / 1
DIY Print Bed Filament Dryer PETG 65C 4hours
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIY Print Bed Filament Dryer PETG 65C 4hours
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 992
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
DIY Print Bed Filament Dryer PETG 65C 4hours
added
G28 W ; home all without mesh bed level
to the G code
like this
G90 ; use absolute coordinates
G28 W ; home all without mesh bed level
G1 X100 Y200 Z200.0 F720 ; move x-axis to top to make space for box and move printer bed to front
this stopped the printer from crashing in to itself at start-up
| Filament | Dryer Temperature | Drying Time (Hours) |
| PLA | 55°C (131°F) | > 3 |
| ABS | 65°C (149°F) | > 3 |
| PETG | 65°C (149°F) | > 3 |
| Nylon | 75°C (167°F) | > 12 |
| Desiccants | 65°C (149°F) | > 3 |
| PVA | 45°C (113°F) | > 10 |
| TPU/TPE | 55°C (131°F) | > 4 |
| ASA | 65°C (149°F) | > 4 |
| PP | 55°C (131°F) | > 6 |
| HIPS | 65°C (149°F) | > 4 |
| PC | 75°C (167°F) | > 6 |
| PEEK | 75°C (167°F) | > 6 |
These recommendations are made under the following conditions.
Ambient RH:50%
Ambient Temp:25°C
500g filament spool
Credit : https://www.reddit.com/r/3Dprinting/comments/yhkc2p/pla_oven_drying_temperature/