1 / 1
DIY Print Bed Filament Dryer PETG 65C 4hours
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DIY Print Bed Filament Dryer PETG 65C 4hours
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 50
- Makes
- 0
- Views
- 992
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
DIY Print Bed Filament Dryer PETG 65C 4hours
added
G28 W ; home all without mesh bed level
to the G code
like this
G90 ; use absolute coordinates
G28 W ; home all without mesh bed level
G1 X100 Y200 Z200.0 F720 ; move x-axis to top to make space for box and move printer bed to front
this stopped the printer from crashing in to itself at start-up
| Filament | Dryer Temperature | Drying Time (Hours) |
| PLA | 55°C (131°F) | > 3 |
| ABS | 65°C (149°F) | > 3 |
| PETG | 65°C (149°F) | > 3 |
| Nylon | 75°C (167°F) | > 12 |
| Desiccants | 65°C (149°F) | > 3 |
| PVA | 45°C (113°F) | > 10 |
| TPU/TPE | 55°C (131°F) | > 4 |
| ASA | 65°C (149°F) | > 4 |
| PP | 55°C (131°F) | > 6 |
| HIPS | 65°C (149°F) | > 4 |
| PC | 75°C (167°F) | > 6 |
| PEEK | 75°C (167°F) | > 6 |
These recommendations are made under the following conditions.
Ambient RH:50%
Ambient Temp:25°C
500g filament spool
Credit : https://www.reddit.com/r/3Dprinting/comments/yhkc2p/pla_oven_drying_temperature/