Skadis Wera tools folding panel - allen keys, sockets and more
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool holder that is flat against the Skadis board or can be folded out.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 75
- Wydruki
- 1
- Wyświetlenia
- 998
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Colelction of parts inspired by Mark Harris and using my modified hinge to connect to Ikea Skadis pegboard.
Print the hinge with supports as shown, and all other parts flat.
If you want, use a longer M8 nut and bolt for more stability, although this prevents the useful feature of removing the pin and allowing the organiser to be removed temporarily.
I found the thickess of the plastic cover on the allen keys varied, so two of the fittings were tight (5mm, 6mm). If you have the same problem, make the hole slightly larger in the model or a small amount of filing also helps!
The models with ‘bracket’ in the name have slightly larger holes and numbers on the front for tool sizes.
The exension is almost mandatory (it slots under the main bracket and should be glued) as it stops the allen keys from hanging at an angle.