Regalo Stairway and Hallway Safety Gate Stopper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gate stopper: 3D printed replacement to prevent gate lift. Replaces broken original part.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
This is a replacement part for a broken original. No reinforcements were added. I used a caliper with 10 microns precision to measure the dimensions and built the 3D model from the original using Cadwork. I printed this piece using two different technologies.
Firstly, I used SLS (Selective Laser Sintering) technology with Nylon 11 material and 100 microns precision. It fitted perfectly, and the printed piece is more flexible than the original part, especially the legs. The cover photo shows the SLS printed one next to the broken original.
Secondly, I used FDM (Fused Deposition Modeling) technology, PLA+ plastic, and a layer height of 200 microns. This time, there was a bit less room, and it was a bit harder to insert it in place, but it worked fine as well.
