1 / 2
Vacuum Nozzle Adapter 57mm ID to 25.4mm(1in) OD
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Likely the longest vacuum adapter you can print on a Mini+. 57mm ID on one end and 25.4mm(1in) OD on the other.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is it. Likely the longest vacuum adapter you can print on a Mini. 57mm ID on one end and 25.4mm(1in) OD on the other. For use on the Mini and Mini+ you'll need to print at approximately a 45 degree angle in both axis. Pair with my max length long, thin nozzle for the best reach printed on a Mini.