Accessory mount (26mm) for 50mm bike tube frame (e.g. recumbent)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a clamp to mount devices meant for a regular European bike on a 50mm tube-shaped bike frame.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 552
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a clamp to mount devices meant for a regular European bike on a 50mm tube-shaped bike frame. You will need a rubber O-ring with a diameter of about 40-45mm to attach it firmly. I also recommend a few tiny drops of hot glue or a thin sheet of rubber when attaching it, to prevent rattling.
The design also features two small cable guides at the left side.
Print Settings
Supports: No
Resolution: 0.2
Infill: 18%
Notes:
There is an STL provided with built-in support for FDM printing which can be easily removed after printing. I recommend to use that and disable automatic support in your slicer.