Accessory mount (26mm) for 50mm bike tube frame (e.g. recumbent)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a clamp to mount devices meant for a regular European bike on a 50mm tube-shaped bike frame.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 39
- Makes
- 0
- Views
- 552
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a clamp to mount devices meant for a regular European bike on a 50mm tube-shaped bike frame. You will need a rubber O-ring with a diameter of about 40-45mm to attach it firmly. I also recommend a few tiny drops of hot glue or a thin sheet of rubber when attaching it, to prevent rattling.
The design also features two small cable guides at the left side.
Print Settings
Supports: No
Resolution: 0.2
Infill: 18%
Notes:
There is an STL provided with built-in support for FDM printing which can be easily removed after printing. I recommend to use that and disable automatic support in your slicer.