Lora APRS - TTGO T-Beam Case MK2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lora APRS - TTGO T-Beam Case. This is a rugged case for your APRS - Lora TTGO T-Beam device with SMA antenna plug.
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 321
- Wydruki
- 4
- Wyświetlenia
- 2619
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a rugged case for your LORA-Aprs TTGO T-Beam device with SMA antenna plug.
Thanks to Breeki for permission to remix and publish. I modified his great work and added clearance for the printed circuit board so that each version fits, I also adjusted the space for the antenna to fit better and receive the GPS signal.
BOM:
1. TTGO T-Beam
2. 6x M3 4.6x5.7mm heat sink nut inserts
3. 1x 28x28x2.5mm plexi glass square
I recommend setting Tree supports Cura or Slicer. They will be better and easier to remove.
Print parameters
Nozzle: 0,4
Supports: YES
Material: PLA, PETG
>> If you want to buy me a coffee, you can for any amount, I will be very grateful. <<
Don't forget to follow my profile so you don't miss anything. It costs nothing and made me happy. Thanks in advance.
Don't forget to upload a photo of your print and share.
Thank you very much for your support.
