Nightfury Glider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Glider modelled after the silhouette of a Nightfury dragon.
- Ocena
- 4,857 / 5
- Polubienia
- 133
- Pobrania
- 1473
- Wydruki
- 6
- Wyświetlenia
- 4498
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Glider modelled after the silhouette of a Nightfury dragon. I saw Sevro's dragon glider and I had to make my own.
Printing Instructions:
Print at 100% infill to ensure proper weight and with the 105% first layer extrusion width to ensure a good wing layer. Print at 0.2 layer height. I used PLA.
Post-Processing:
You need to bend the tail up a little and the tail wings up towards the center about 20°.
You will almost need to bend the main wings up towards the body approximately 20° too. I discovered that you will need to do some experimenting with the wing angle in order to get a good flight out of it.
Working on other styles of gliders amongst other projects.
Let me know if there is a problem with the files.