Modular stand for 425 g CO2 cylinders / bottles (SodaStream, Brita and others)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular stand for 425 g CO2 cylinders / bottles used in home water carbonators like the SodaStream system.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 117
- Wydruki
- 1
- Wyświetlenia
- 502
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A modular stand for 425 g CO2 cylinders / bottles used in home water carbonators like the SodaStream system. The stand consists of one end and one intermediate piece design, which are connected like a jigsaw puzzle. Tolerances on the puzzle interface are 0.3 mm all around, which should be fine for most FDM printers.
A stand-alone “single" version of the design is also provided, in case you don't have more than one bottle to store.
Print settings
- Layer height 0.24 - 0.3 mm
- Line width 0.42 mm
- Infill 10 - 25%
- 3 wall lines
- 3 bottom layers
- 5 top layers
- Supports not required
Approximate print times @ 60 mm/s: Single 2:30 h / End piece 2:45 h / Intermediate piece 2:55 h