Modular stand for 425 g CO2 cylinders / bottles (SodaStream, Brita and others)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modular stand for 425 g CO2 cylinders / bottles used in home water carbonators like the SodaStream system.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 117
- Makes
- 1
- Views
- 500
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A modular stand for 425 g CO2 cylinders / bottles used in home water carbonators like the SodaStream system. The stand consists of one end and one intermediate piece design, which are connected like a jigsaw puzzle. Tolerances on the puzzle interface are 0.3 mm all around, which should be fine for most FDM printers.
A stand-alone “single" version of the design is also provided, in case you don't have more than one bottle to store.
Print settings
- Layer height 0.24 - 0.3 mm
- Line width 0.42 mm
- Infill 10 - 25%
- 3 wall lines
- 3 bottom layers
- 5 top layers
- Supports not required
Approximate print times @ 60 mm/s: Single 2:30 h / End piece 2:45 h / Intermediate piece 2:55 h