1 / 3
Miniatures Painting Handle w/ Bearings & Ball Plunger — zdjęcie 1
1 / 3

Miniatures Painting Handle w/ Bearings & Ball Plunger

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A painting handle with a rotating platform that spins on bearings and is restricted by a ball plunger

Ocena
4,5 / 5
Polubienia
58
Pobrania
217
Wydruki
2
Wyświetlenia
2276
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

A painting handle with a rotating platform that spins on bearings and is restricted by a ball plunger. The rotating platform is assembled with two bearings and a long M4 screw. I used an M6 ball plunger although it can be used without one.

It should be able to have a set screw keeping the center cylinder in place but I ended up just keeping it in place with friction.

I use a steel strike plate to allow magnetic miniatures to attach, with some fabric tape for extra friction.

Tagi