LEGO hook for Skadis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of LEGO Minifigure display shelf for IKEA Skådis board with T-nut mounting.
- Ocena
- 5 / 5
- Polubienia
- 155
- Pobrania
- 413
- Wydruki
- 4
- Wyświetlenia
- 2549
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
LEGO compatible plates to display minifigures or small builds for IKEA's Skådis board. The collection of LEGO shelfs is available in 20 different sizes ranging from 1x2 up to 4x6 plates.
For the LEGO pieces to fit well, there are small tolerances. 5/100 mm can be the difference between the pieces being fixed or loose. The measurements I have chosen are 5.0 mm in diameter for the studs and 8.0 mm distance between the studs.
Installation
The LEGO shelf is mounted on the Skadis board using a T-nut that is made to fit M3 screws. T-nuts ensure a strong and secure hold and are easy to install and remove by using a screwdriver. The LEGO plates are available in two different versions, one with countersunk holes and the other with flat holes, depending on the type of screws you use. The screws that you will need to use should be about 15 mm in length.
Place the screw in the T-nut through the holes in the LEGO shelf and screw it in until the T-nut is about 2-3 mm from the back of the LEGO shelf, insert the T-nuts vertically through the Skadis holes, then as you tighten the screw the T-nut will turn and lock the LEGO shelf to the board.
You can find and download the matching T-nut here: Skadis T-nut for M3 screw.
Printing and print settings
In the model files, the parts are orientated in the direction best suited for printing. Use PLA for printing with a layer height of 0.2mm or less and a nozzle width of 0.4mm or less. A wall thickness of at least 3 lines and an infill of 25%. A support structure for the screw hole is recommended for the printing.
More of my models
Click here if you are interested in seeing more of my models for IKEA Skådis board.
Feedback is always a good thing. To encourage me or other designers to make more models, hit like and/or post your makes. If something doesn't work or is missing and can be improved, please leave a comment.