Dörrex Dehydrator Spacer for large 2kg Spools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer for 2kg+ spools for drying in a Dörrex dehydrator, printable on a Prusa MK3/4 bed.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 253
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a dirty remix of the original Stöckli Dörrex dehydrator spacer for large spools of filament.
I basically just cut it into 4 equal parts, you can fit 2 on a bed so it fits a MK3/MK4.
Printed in PETG on MK4 Alpha with input shaper in under 5h (for 2 segments out of 4).
Use a smooth sheet to ensure adhesion. I tried on a silk (with input shaper) and one corner came off. This might not be a problem without input shaper / slower.
I also printed a part without input shaper at 0.3 layer height in ~7:30h, also came out fine.
I have not added any larger surfaces to the model for gluing it up, as I might just leave it in quarters for easier storage.