Dörrex Dehydrator Spacer for large 2kg Spools
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€8.24 – €10.08 net (excluding VAT)
For file: ALPHA zwischenTeil_02_rotiert segment aus slicer_0.4n_0.2mm_PETG_MK4IS_4h23m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €9.16 excluding VAT (range midpoint).
- Weight reported by the author
- 233 g
- Print time reported by the author
- 4.23 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Spacer for 2kg+ spools for drying in a Dörrex dehydrator, printable on a Prusa MK3/4 bed.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 28
- Makes
- 0
- Views
- 256
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a dirty remix of the original Stöckli Dörrex dehydrator spacer for large spools of filament.
I basically just cut it into 4 equal parts, you can fit 2 on a bed so it fits a MK3/MK4.
Printed in PETG on MK4 Alpha with input shaper in under 5h (for 2 segments out of 4).
Use a smooth sheet to ensure adhesion. I tried on a silk (with input shaper) and one corner came off. This might not be a problem without input shaper / slower.
I also printed a part without input shaper at 0.3 layer height in ~7:30h, also came out fine.
I have not added any larger surfaces to the model for gluing it up, as I might just leave it in quarters for easier storage.