YARI - Yet Another Rotation Indicator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heavily inspired by all the different rotation indicators flying around. Very thin and lean version.
- Ocena
- 4,889 / 5
- Polubienia
- 21
- Pobrania
- 353
- Wydruki
- 6
- Wyświetlenia
- 1528
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Heavily inspired by all the different rotation indicators flying around. Very thin and lean version.
I primarily did this to have something fitting to the magnets that are flying around in the office and to test the variants feature of my CAD system.
I am using one on the extruder and one on the pulley of the MMU2.
Print instructions
Models
The indicator is available in three different ring diameters and two different sizes of the ring itself. The six models are available as stl files.
Sizes:
large: 35mm diameter
normal: 30mm diameter
small: 25mm diameter
Thickness:
thin: 2mm
thick: 3mm
There are two PursaSlicer files directly available, one which contains one of every version and one which contains a large and a normal thin one I use on extruder and MMU2 pulley myself.
Magnets
The models need round magnets of 6mm diameter and 3mm height. They are just pressed into the model and stick by themselves.
In Germany they are for example available from amazon:
https://www.amazon.de/gp/product/B0761RD761
Slices
I had best results using 0.15mm for layer height. Gcode for a set of all six and the two I use are available for MK3s+MMU2s