Motoblitz expanded battery cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
an expanded battery cover for the Motoblitz
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
This battery cover was designed with an internal width of 29mm, a length of 106mm and an height of 23mm, which, combined with the 12,75mm of height of the original battery compartment arrives to 35,75mm, so it holds comfortably a 1000mAh 3s lipo. To close it i used this thumbscrew with a m3x16 hex bolt and, obviously, a m3 nut.
Designed with a “fun” battery design on the top, but i also uploaded a plain version.
Print it as is with supports from the buildplate enabled, since it's such an horridly designed battery door geometry in regards to 3d printing!