Raspberry Pi 4 case mount with 30mm and/or GPIO options REMIX to include slide mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I thought I'd create a REMIX of my case, in order to not get the post mixed up into a mish mash of cases. The original…
- Ocena
- 3 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 413
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I thought I'd create a REMIX of my case, in order to not get the post mixed up into a mish mash of cases.
The original case is here: https://www.printables.com/model/545997-raspberry-pi-4-case-mount-with-30mm-andor-gpio-opt
Where the top part of the case can be found, as there is an option for GPIO.
This case slides into the mount and is retained by a push clip.
The clip needs supports, most likely.
The case in the image was printed in PETG as I find the flex handy but I'm sure PLA would also suit.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
10
Filament: Eryone PETG yellow
Notes:
PLA would probably suit too but I used PETG
Category: Electronics