Raspberry Pi 4 case mount with 30mm and/or GPIO options REMIX to include slide mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I thought I'd create a REMIX of my case, in order to not get the post mixed up into a mish mash of cases. The original…
- Rating
- 3 / 5
- Likes
- 5
- Downloads
- 40
- Makes
- 1
- Views
- 417
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I thought I'd create a REMIX of my case, in order to not get the post mixed up into a mish mash of cases.
The original case is here: https://www.printables.com/model/545997-raspberry-pi-4-case-mount-with-30mm-andor-gpio-opt
Where the top part of the case can be found, as there is an option for GPIO.
This case slides into the mount and is retained by a push clip.
The clip needs supports, most likely.
The case in the image was printed in PETG as I find the flex handy but I'm sure PLA would also suit.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
10
Filament: Eryone PETG yellow
Notes:
PLA would probably suit too but I used PETG
Category: Electronics