MK4 xLCD Cover - Low Profile for Original Prusa Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the xLCD cover for the Prusa MK4, designed for the Original Prusa Enclosure to be lower profile than stock.
- Ocena
- 5 / 5
- Polubienia
- 87
- Pobrania
- 133
- Wydruki
- 5
- Wyświetlenia
- 2188
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
The standard LCD cover and brackets that are for the MK4 and Original Prusa Enclosure stick out a bit farther that they really need to, so I designed this alternative. No brackets are needed with this design, the cover just mounts directly to the enclosure.
You will need to install two M3 heat set inserts. I used 6mm long inserts, but shorter ones should also work.
Unfortunately I only have the “R2” design completed at the moment. This won't fit if you have the newer version board that works with “R3”
I also modified and tweaked a few other features. Here are all of the benefits:
- Overall footprint of the enclosure is slightly smaller.
- Since there is less leverage, the display ends up feeling a lot more rigid when you click the knob.
- Thin lines added to the face for aesthetics.
- Cut down reset button by 0.4mm to make it harder to accidentally press.
- Cut USB port slot taller by 0.2mm
- Added extended boss at the front, this makes it easier to print cleanly (I was having trouble with the angled face going right down to the build plate).
If you don't want to print with multiple colors, just print the main part. I've also included a version that is blank with no logos or text. If you are printing multicolor, I recommend printing the black color first for the cleanest results. It will print fine with a 0.4mm nozzle, but I printed with a 0.25mm nozzle for cleaner text.