Corner position-holding table bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts to the table and provides a corner that an object can be fit snug into for consistent positioning.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
I have a laser engraver from Amazon (Nasum A5 Pro), that I wanted to anchor to the table to keep it in the same position every time I used it. The style of the engraver is that there is a flat piece of metal perpendicular to the floor for each foot, so I just created a piece that screws to the table to constrain a corner/foot from moving outward, with the idea to use 4 (or at least 2) of them to fully constrain the position of the engraver.
It is parametric, so you can switch between left and right ("left" value is 1 or 0), as well as customize whatever other dimmensions you want.
I printed mine with PETG+, and have been pretty happy with it. I snugged it up against the corners where I wanted it, marked the holes with a pen, then removed the engraver, drilled, replaced the engraver, replaced the PETG pieces, and used some #10x1" wood screws to attach it to the table. I can't get the engraver to budge even a little by pushing on it with these on.