Ubiquiti Unifi Mini Networking Rack

Organize your networking gear compactly and cleanly, without taking up the space of a full size 19" rack.

There are mounts included for:

• US-8 Switches
• US-8 150w POE Switch
• USG Gateway
• Flex XG 10gbe Switch

All mounts have openings for standard keystone ethernet jacks.

The USG mount also includes an accessory tray to hold a cloud key, raspberry pi, or any other IOT devices.

It is designed to mount to Makerbeam 10mm aluminum extrusion, but I have also included printable rack ears if you want to only use 3D printed parts. Note that I haven't personally printed or tested the rack ears, since I built mine with Makerbeam.

Everything is sized to be printable on the Prusa Mini.

STEP Files included, feel free to modify for your own needs!

Print instructions

Print everything flat side down, as oriented in the STLs.

Assembly Instructions

USG Gateway

- 6x Standard Ethernet Keystone Jacks The two halves of these brackets can either be glued together or attached with an M3x4mm orM3x6mm countersunk screw and an M3 nut. The USG friction fits into place.

US-8 POE Switch

- 2x Standard Ethernet Keystone Jacks These brackets attach to the side of the Switch using the mounting hardware that comes with the switch. I believe they are m4 screws.

US-8 Switch

- 6x Standard Ethernet Keystone Jacks The two brackets friction fit on each side of the switch.

3D Printed Rack Frame - Optional

Print two of the part Printable_Rack.stl. Attach rackmount items using M3 screws.

Makerbeam Frame - Optional

• 1x Makerbeam 300mm
• 4x Makerbeam, length depends on how many devices you have
• 2x 90degree L Bracket
• 2x Corner Bracket
• 18x M3x6mm Square head screws
• 18x M3 Nuts

Assemble with whatever lengths you'd like. The inside width of the rack should be 300mm. Outer width is 320mm, and the screw centers are 310mm apart.

You can get a pretty nice starter pack of makerbeam here.

Update 12/2022 - Added FlexXG bracket and STEP files.