Makita LS1212 / LS1013 Miter Saw Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Miter inserts were all chewed up, so I designed new ones as close as I could to the original. Should be easily…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 794
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Miter inserts were all chewed up, so I designed new ones as close as I could to the original. Should be easily modifiable if you want to try 0 clearance insert.
To connect the two pieces, I had played with the idea of a puzzlepiece-like connector, but any weight in the middle would cause it to buckle. The connector as designed now is glued in place in both tracks in the middle, making it more sturdy. Print 2 connectors
TinkerCAD file can be found here: https://www.tinkercad.com/things/f1gSdG4txfR
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: Inland PLA+ Yello
Category: Parts