1 / 3
Baby Crib Mount for Tapo C200 / C210 (20mm) — zdjęcie 1
1 / 3

Baby Crib Mount for Tapo C200 / C210 (20mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tapo C200/C210 mount for cribs which have walls 18-20mm thick.

Ocena
0 / 5
Polubienia
27
Pobrania
269
Wydruki
0
Wyświetlenia
1407
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I didn't want to use the screw that the original mount requires. My crib wall is ~19mm thick so I cut small chunk out of the original model such that the gap was ~20mm. While it makes the model less versatile, it is a little more convenient to use in this specific scenario.

I printed it with PETG but should be absolutely fine in PLA. You defnitely need supports for the clips, though.
 

Tagi