MK4 Fan Shield HSW (Honeycomb storage wall system)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fan cover for Prusa MK4 with functional HSW (honeycomb storage wall system).
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 820
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Yeah that’s right it’s a fan guard where you can put your HSW inserts.
If you got any suggestions fell free to comment bellow.
Choose from files listed below
| Name | Description |
| MK4_fan_2_holes_HSW | Prusa MK4 fan shield with functional HSW. Mount using original fan bolts. |
| MK4_fan_4_holes_HSW | Prusa MK4 fan shield with functional HSW OCD edition Mount using original fan bolts on left, on right side use any relatively shorter bolts (i've used spare M3x10 from kit). It's thigh fit but dab of superglue would be advice. |
| MK4_fan_2_holes_HSW_looker | Coming soon (I need to render them one more time) Prusa MK4 fan shield with non-functional HSW. You like look of Honeycomb but HSW is to bulky for you. |
| MK4_fan_4_holes_HSW_looker | Coming soon (I need to render them one more time) Prusa MK4 fan shield with non-functional HSW OCD edition. Same as above, you like look of Honeycomb but HSW is to bulky for you but also you hate 2 screws design |
But why?
Because why not. I'm grinding my way to fill up that pesky Prusameter so I would appreciated your input.