1 / 1
Adafruit MacroPad RP2040 with Enclosure Snap Fit case Remix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of Dennis_26861 to fit the Adafruit Macropad as assembled with the enclosure from Digikey.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 583
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (15)Powiązane
This is a remix of Dennis_26861's case for the Adafruit MacroPad to accomodate the MacroPad with the enclosure from Digikey. As per the original design it s a snap fit case.
The top part is the same as the original design.
Can be printed in PLA or PETG.
Printing settings:
- 0.2 Quality preset on Mini+;
- Arachne perimeter generator or “Detect Thin Walls” with Classic so the that the tips of the snap tabs do not make gaps in the side walls;
- 2 perimeters
- 15% infill
Happy printing!