Original Enclosure Top Center Opening Filament Passthrough
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When you want to install a spool holder on the top of an original Prusa enclosure and feed the filament into enclosure
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 80
- Wydruki
- 3
- Wyświetlenia
- 423
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
There are many variants, but the main idea is simple: with is a replacement for the top center hole coved and should be fixed with the same two nylon rivets.
You can choose one of the file models:
- Wide slit
- Single hole
- Single hole with PTFE insert
- Two holes
- Two holes with PTFE insert
In general, the slit is the least constraining, while PTFE inserts (from a standard 4mm tube) should eliminate friction in narrow holes. It can be useful to have two holes if you are doing manual filament changes just for a couple of layers, so you can keep your main filament setup while temporarily feeding the second filament thought the second hole