1 / 2
PixelBlaze Lamp
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a lamp that takes a 16x16 WS2812 LED matrix controlled by a PixelBlaze.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 480
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (21)Powiązane
This is a lamp that takes a 16x16 WS2812 LED matrix controlled by a PixelBlaze.
Print instructions
This should be printed with supports and using a transparent filament. I have not tried translucent coloured filaments, but that might look good too.
The supports on the LED cavities might be hard to remove. I had to make a simple tool from some 3mm wire that I bent to an appropriate shape and filed a chisel tip onto.