1 / 2
PixelBlaze Lamp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a lamp that takes a 16x16 WS2812 LED matrix controlled by a PixelBlaze.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 31
- Makes
- 0
- Views
- 480
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a lamp that takes a 16x16 WS2812 LED matrix controlled by a PixelBlaze.
Print instructions
This should be printed with supports and using a transparent filament. I have not tried translucent coloured filaments, but that might look good too.
The supports on the LED cavities might be hard to remove. I had to make a simple tool from some 3mm wire that I bent to an appropriate shape and filed a chisel tip onto.