GXS_Satsana (remixed) DD Dual 5015 Fan Shroud for ender 3 max
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
some heavy edits to make this work with the ender 3 max as well as GXS BMG Direct Drive Mount for Ender 3 Max
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 71
- Wydruki
- 6
- Wyświetlenia
- 901
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
version 2 :
designed to work with the linear rails. the mount should still bolt up. but the endoscope mount will not work with wheels
New Version 2 printing:
time- lapse printing
****another update.. *****
i have run countless prints now with no melting or anything strange happening.
important notes with current file that is uploaded…
- you will have to remove the bottom gantry wheel , and bolt to mount the endo camera mount
- the location i have my light is useless for the endoscope.
- -may make a mount to at say 45 / or maybe moveable… hmmm
- i only am running the cooling fans at 50% i have not done any overhang or bridge tests yet
- the USB ADXL does not fit on the top unless you bend pins or not at all maybe.
- still have not done edits from last upload
- you can see it in action on my live 3d printer cam streams sometimes 4 times a week.
https://www.youtube.com/@TheGrafxShop/streams
unkown facts :
- i like tips
- i like cats
- i also am liking Tupac , KFC and text text messaging
| cool | you can | add | tables! |
| Printables.com ROCKS! | |||
*Tips & Donations* https://www.paypal.com/donate/?hosted_button_id=A7Q7BWYSD9FAA | |||
***update***
first test . via a live z probe offset calibration
****update****
Added more pics. Some modifications will be required based on your install . I'll make the edits to the next version of the model to make this as close to zero effort as possible when I get time . But till then it's nothing sone side cutters and a drill bit can't fix .
I made the wires shorter on all 3 fans for a cleaner look. I ran a switched 12 volt wire to controll extra leds to light up the nozzle camera and I cleaned up all the wires all into the one loom . Again to get a cleaner look. As stated from the start. This is more or less a work in progress but a released finished model to edit and modify as needed. All I ask is thst you upload detailed changed as a remix so others can take advantage of this project .
You could send me a tip or donation as well that would probably make me happy
**update**
did first test print.
need to edit the hole for the wire plug to be a bit bigger for the plug to fit. need to make wire slot slightly bigger
other then that the print looks pretty good.
*update*
live printing the test model
https://youtube.com/live/UhQESsmL9H0
**update**
design is made to work with
https://www.printables.com/model/511217-gxs-bmg-direct-drive-mount-for-ender-3-max
**update** this should be all the required parts …..
Mount for USB adxl345 accelerometer (trianglelab) https://s.click.aliexpress.com/e/_DmfZD5H
2x 5015 fans - (ender 3 max takes 24 volt version) https://amzn.to/3qnqeCL
1x 4010 Fan (24Vfor ender 3 max) - https://amzn.to/45mcQxD
Connector Wire Cable 100mm (XH2.54mm - https://amzn.to/456rIR1
3mm x 4.3mm Brass Injection Molding Knurled Threaded Insert Nut https://amzn.to/3qgDaKV
400Pcs Button Head Socket Cap M3 Screws Bolts
i guess id still call this a remix as i started out with the file made by hobbyfarm .
iv done all the editing i can do at this point based on my skills.
the model still needs to be cleaned up and smoothed out. i welcome anyone to do that and remix it . im no good at that. i just made this work with https://www.printables.com/model/511217-gxs-bmg-direct-drive-mount-for-ender-3-max
once its “finished” it could be edited pretty easy to fit any printer im sure. but thats beon my skills