GXS_Satsana (remixed) DD Dual 5015 Fan Shroud for ender 3 max
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
some heavy edits to make this work with the ender 3 max as well as GXS BMG Direct Drive Mount for Ender 3 Max
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 71
- Makes
- 6
- Views
- 901
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
version 2 :
designed to work with the linear rails. the mount should still bolt up. but the endoscope mount will not work with wheels
New Version 2 printing:
time- lapse printing
****another update.. *****
i have run countless prints now with no melting or anything strange happening.
important notes with current file that is uploaded…
- you will have to remove the bottom gantry wheel , and bolt to mount the endo camera mount
- the location i have my light is useless for the endoscope.
- -may make a mount to at say 45 / or maybe moveable… hmmm
- i only am running the cooling fans at 50% i have not done any overhang or bridge tests yet
- the USB ADXL does not fit on the top unless you bend pins or not at all maybe.
- still have not done edits from last upload
- you can see it in action on my live 3d printer cam streams sometimes 4 times a week.
https://www.youtube.com/@TheGrafxShop/streams
unkown facts :
- i like tips
- i like cats
- i also am liking Tupac , KFC and text text messaging
| cool | you can | add | tables! |
| Printables.com ROCKS! | |||
*Tips & Donations* https://www.paypal.com/donate/?hosted_button_id=A7Q7BWYSD9FAA | |||
***update***
first test . via a live z probe offset calibration
****update****
Added more pics. Some modifications will be required based on your install . I'll make the edits to the next version of the model to make this as close to zero effort as possible when I get time . But till then it's nothing sone side cutters and a drill bit can't fix .
I made the wires shorter on all 3 fans for a cleaner look. I ran a switched 12 volt wire to controll extra leds to light up the nozzle camera and I cleaned up all the wires all into the one loom . Again to get a cleaner look. As stated from the start. This is more or less a work in progress but a released finished model to edit and modify as needed. All I ask is thst you upload detailed changed as a remix so others can take advantage of this project .
You could send me a tip or donation as well that would probably make me happy
**update**
did first test print.
need to edit the hole for the wire plug to be a bit bigger for the plug to fit. need to make wire slot slightly bigger
other then that the print looks pretty good.
*update*
live printing the test model
https://youtube.com/live/UhQESsmL9H0
**update**
design is made to work with
https://www.printables.com/model/511217-gxs-bmg-direct-drive-mount-for-ender-3-max
**update** this should be all the required parts …..
Mount for USB adxl345 accelerometer (trianglelab) https://s.click.aliexpress.com/e/_DmfZD5H
2x 5015 fans - (ender 3 max takes 24 volt version) https://amzn.to/3qnqeCL
1x 4010 Fan (24Vfor ender 3 max) - https://amzn.to/45mcQxD
Connector Wire Cable 100mm (XH2.54mm - https://amzn.to/456rIR1
3mm x 4.3mm Brass Injection Molding Knurled Threaded Insert Nut https://amzn.to/3qgDaKV
400Pcs Button Head Socket Cap M3 Screws Bolts
i guess id still call this a remix as i started out with the file made by hobbyfarm .
iv done all the editing i can do at this point based on my skills.
the model still needs to be cleaned up and smoothed out. i welcome anyone to do that and remix it . im no good at that. i just made this work with https://www.printables.com/model/511217-gxs-bmg-direct-drive-mount-for-ender-3-max
once its “finished” it could be edited pretty easy to fit any printer im sure. but thats beon my skills