1 / 10
Magnetic Waste Basket for Original Prusa Enclosure — zdjęcie 1
1 / 10

Magnetic Waste Basket for Original Prusa Enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Filament Waste Basket that magnetically attaches to your Original Prusa Enclosure

Ocena
4,714 / 5
Polubienia
78
Pobrania
177
Wydruki
8
Wyświetlenia
1363
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I created this Magnetic Waste Basket to provide a convenient place to hold filament scraps and imperfect parts right at my Original Prusa MK4 printer - instead of having to constantly make the trip to the plastic recycling bin. It attaches magnetically to any inside corner of the Original Prusa Enclosure and can be easily removed when it's time to be emptied.

Update February 25, 2024:

I just designed and published a Wall-mounted Holder for this Magnetic Waste Basket - for those of you who don't have an Original Prusa Enclosure.  This new holder screws onto any vertical surface and allows you to keep a handy trash bin near your printer; the magnetic attachment makes it easy to empty the bin when it's full!  Check it out at: https://www.printables.com/model/781933-wall-mounted-holder-for-magnetic-waste-basket

---------

The provided STL file can be printed in PETG or PLA and does not require supports. The outside dimensions are 100mm by 100mm by 100mm with 2mm thick walls. You will need two 12mm by 3mm neodymium magnets and a few drops of super glue to attach the magnets to the basket.

PrusaSlicer 3MF files are provided for Prusament PETG and for Prusament PLA. G-code files for both are provided for the Original Prusa MK4.

The Magnetic Waste Basket seen in the photos was printed in Prusament Orange PETG with a 0.4mm nozzle at 0.3mm layer height with a 15% gyroid infill.

Tagi