Spiral Coaster (Vase Mode)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Coaster with Spiral - designed to be printed in vase mode
- Ocena
- 4 / 5
- Polubienia
- 5
- Pobrania
- 86
- Wydruki
- 1
- Wyświetlenia
- 383
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to print some coasters with TPU, but I was having stringing issues with all the designs I found online. So I made a design that I thought was stylish enough that could be printed with TPU in vase mode (and no stringing)!
Print Tips:
PLA, PETG, ASA, etc will work great with this design printed in vase mode at any nozzle size. HOWEVER - I made this design to work well with TPU. My 0.4 nozzle works with this print just fine, but it is a bit flimsier than I prefer for heavier mugs/cups/glasses. For best results with TPU (and the way I prefer to print these) choose a larger nozzle for a thicker line width - I used a 0.8 nozzle with TPU and it makes for some fantastic coasters.