Spiral Coaster (Vase Mode)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Coaster with Spiral - designed to be printed in vase mode
- Rating
- 4 / 5
- Likes
- 5
- Downloads
- 86
- Makes
- 1
- Views
- 383
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to print some coasters with TPU, but I was having stringing issues with all the designs I found online. So I made a design that I thought was stylish enough that could be printed with TPU in vase mode (and no stringing)!
Print Tips:
PLA, PETG, ASA, etc will work great with this design printed in vase mode at any nozzle size. HOWEVER - I made this design to work well with TPU. My 0.4 nozzle works with this print just fine, but it is a bit flimsier than I prefer for heavier mugs/cups/glasses. For best results with TPU (and the way I prefer to print these) choose a larger nozzle for a thicker line width - I used a 0.8 nozzle with TPU and it makes for some fantastic coasters.