1 / 16
DIY Woodworking Upgrade: TRIPLING power of (affordable) 10" VEVOR bandsaw!
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIY Woodworking Upgrade: TRIPLING power of (affordable) 10" VEVOR bandsaw!
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 1255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
VIDEO TUTORIAL:
Watch this tutorial video for use of this printed pulley in upgrading an affordable VEVOR brand band saw to triple its horsepower!
“DIY Woodworking Upgrade: TRIPLING power of my (affordable) VEVOR bandsaw!”
Purchase links:
- VEVOR 10" Bandsaw 0.5HP, 6" cut height, 10" cut width - https://www.vevor.com/band-saw-c_11027/vevor-band-saw-with-stand-9-65-inch-560-1100-rpm-two-speed-benchtop-bandsaw-370w-1-2hp-motor-6-cutting-height-72-13-sawblade-length-with-fence-and-miter-gauge-for-woodworking-aluminum-plastic-p_010972450897
- VEVOR Electric Motor 1.5HP 1-Phase, 1750 RPM, 5/8" shaft, 3/8" keyway (eBay) - https://www.ebay.com/itm/125723038427
- VEVOR Electric Motor 1.5HP 1-Phase, 1750 RPM, 5/8" shaft, 3/8" keyway (VEVOR) - https://www.vevor.com/single-phase-general-ac-motor-c_11219/electric-motor-1-5hp-56c-1-phase-tefc-115-230v-3600rpm-60hz-keyed-shaft-p_010870792705
- Toothed Drive Belt for Central Machinery Harbor Freight Belt Sander Model 38123 - https://www.ebay.com/itm/324709781836
- XL Timing Belt Pulley (Drive Pulley - 20 teeth) - https://us.misumi-ec.com/vona2/detail/110300405510/?HissuCode=STP20XL037-A-NUG
- Carbide tipped re-saw blade 72" x 1/2" - https://www.highlandwoodworking.com/carbide-bandsaw-blade.aspx
Print info:
- Prints without supports
- Print as oriented in the file
Additional part used in project:
- Cable screw connector/Cable gland - https://www.printables.com/model/320131-cable-screw-conectorcable-gland/
Install info:
- Use three (3) screws M5 x 30mm
- Designed to fit the VEVOR 10" bandsaw listed above.
- Must remove saw blade and lower wheel and remove existing, stock, injection-molded, driven pulley to replace it with this printed part.
- Negates use of stock drive pulley - see link above for replacement drive pulley
- Negates use of stock drive belt - see link above for replacement drive belt
Advantages:
- Facilitates upgrading stock 0.5HP motor to the 1.5HP motor listed above
- Greatly increases transmission of added torque from stronger motor, yielding stronger sawing capacity and re-sawing capacity
Also included:
- As promised in the video, included here are .svg, .dxf, and even .stl of the Mounting Base SCHEMATIC for VEVOR Electric Motor 1.5-HP, 1-Phase, TEFC (Totally Enclosed Fan Cooled), 1750-RPM, 5/8"shaft, 3/16" key, ($144.99 on Ebay)
My PayPal tip jar: https://paypal.me/design8studio
Various LowRider 3 CNC remixes:
View all my models and remixes on Printables:
*Amazon product links are affiliate links.