Springy Spiral Spool-hub Desiccant Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds desiccant. Stays in filament spool hub for a wide range of hub diameters (about 55 to 75mm).
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 919
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Holds desiccant. Stays in filament spool hub for a wide range of hub diameters (about 55 to 75mm).
Print instructions
I printed in 0.6mm nozzle but 0.4mm should be fine.
I used clear PETG and filled with orage/green indicating desiccant.
I'd be interested how well it works if anyone makes with PLA.
Cylinder modifier is added such that the top and bottom are only grid infill -- no solid top/bottom layers on the inner portion. This makes a permeable membrane to hold in the desiccant.
Pause print near the top to add desiccant. Once the print is done, the desiccant is permanently inside.