Springy Spiral Spool-hub Desiccant Holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.88 – €3.52 net (excluding VAT)
For file: dessicant-holder_06n_035mm_petg_mk3s_2h26m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.20 excluding VAT (range midpoint).
- Weight reported by the author
- 60 g
- Print time reported by the author
- 2.43 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Holds desiccant. Stays in filament spool hub for a wide range of hub diameters (about 55 to 75mm).
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 91
- Makes
- 0
- Views
- 925
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Holds desiccant. Stays in filament spool hub for a wide range of hub diameters (about 55 to 75mm).
Print instructions
I printed in 0.6mm nozzle but 0.4mm should be fine.
I used clear PETG and filled with orage/green indicating desiccant.
I'd be interested how well it works if anyone makes with PLA.
Cylinder modifier is added such that the top and bottom are only grid infill -- no solid top/bottom layers on the inner portion. This makes a permeable membrane to hold in the desiccant.
Pause print near the top to add desiccant. Once the print is done, the desiccant is permanently inside.