1 / 5
Two way screw with dual threaded nut, various sizes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of a remix, adding various lengths and some improvements.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 384
- Wydruki
- 4
- Wyświetlenia
- 1192
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 4) (Komentarze: 4)Remiksy (0)Kolekcje (48)Powiązane
This is a remix of a remix from AdapWP (on Thingiverse).
It adds a hex pattern which makes turning it easier and adds some weight to the nuts.
I've also added various different lengths of the screw.
The screw is dual-threaded so both clockwise and counter-clockwise nuts will work on it. Best of all, the dual-threaded nut can turn both directions.
It's super fun to fidget with, and a good test of your printer's tolerances. If printed properly, the weight of the nuts is enough for them to slide on their own.