Display stand for Astronaut Phil-A-Ment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Display stand for MatterHackers’ bench test model - Astronaut Phil-A-Ment
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 508
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
This model is designed to display the Astronaut Phil-A-Ment bench test figure. I had a ton of these guys lying around, and needed something to organize them with. Phil's geometry isn't conducive to a fully enclosed stand, so he snugs in about halfway. The tolerances on my printer might not match yours, so print the test model first to fine tune scale.
I scale my Phils down to 35mm to save time and filament, so I've included an appropriately scaled version for the 100mm Phils. This hasn't been tested, so again, print the test for fine tuning before making the big version.
Happy printing!