SSH1106 1.3" OLED CASE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is just a little case i made for an oled i bought off amazon, it uses 4 M3 nuts and bolts to protect the screen.
- Ocena
- 4,667 / 5
- Polubienia
- 29
- Pobrania
- 600
- Wydruki
- 3
- Wyświetlenia
- 1977
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
As previously stated, it is just a little case for the SSH1106 OLED.
Uses 4 M3 nuts and bolts to hold it together and provides quite a bit of protection. (they might be m2 thinking about it…)
just print it with the face down if you want no supports or be a silly person and fill the cavity with supports…
Additionally be careful when putting the screen in as unless you have the exact same model as me, it may need a little sanding or cutting.
If you have read this far, please like and download as it would help me a bunch.
AMAZON LINK TO THE SCREEN (S) : here
code i used to get it running in arduino ide with adafruit gfx is below if needed.